La configuration de la FLEX-M est simple, grâce à l’activation mobile et aux boutons sur la caméra qui vous permettent de formater la carte microSD requise (non fournie) et de prendre une photo test.
La caméra est dotée de quatre modes de capture : Photo, Vidéo, Intervalle et Intervalle+. La fonction Intervalle prend des photos à l'intervalle de votre choix. La fonction Intervalle+ prend des photos à l'intervalle de votre choix et lorsque le capteur de détection de la caméra est déclenché, ce qui est parfait pour surveiller de vastes zones au-delà de la portée de détection de la caméra. Le déclencheur réactif optimise les paramètres de la caméra pour atteindre les conditions exactes au moment de la prise afin d'obtenir la meilleure qualité d'image, à chaque fois. Équipée de la technologie de capture en continu, la FLEX-M peut envoyer et capturer simultanément, pour que vous ne manquiez pas une minute d'action sur le terrain.
Questions
I have 2 Flex M cameras and would like to convert them to solar power but not exactly which solar panel and battery I need. Thank You
Hello, thank you for reaching out regarding the Flex M camera. Both of our solar panels, the SPLB 10 and the SPLB 22, are compatible with the Flex M. The main difference between them is their capacity; the SPLB 22 has a higher capacity for a longer power supply. You can find more information about them using this link https://www.spypoint.com/us/en/accessories
Date published: 2025-06-10
bonjour quelle difference entre la version us et canada svp ?
Bonjour lolo, Merci pour votre question. La différence entre la version américaine et la version canadienne réside dans la carte SIM réactive préactivée incluse avec la caméra. Les fonctionnalités sont identiques, mais chaque carte SIM est conçue pour se connecter automatiquement au meilleur réseau cellulaire disponible dans sa région respective (États-Unis ou Canada).
Date published: 2025-05-25
Can this camera be hooked up to a solar panel and rechargeable batteries
Hello, and thank you for your question!
Indeed, the FLEX M can be powered using multiple sources. You can connect a solar panel via the 12V port and simultaneously insert rechargeable LIT-22 batteries for continuous power. This combination ensures that your camera stays powered, even in remote locations, with minimal maintenance.
Date published: 2025-05-26
Do you still use a zip file to download firmware onto SD card? We have had trouble updating firmware with them in the past.
Hello, thank you for your inquiry. If your camera is actively communicating with our system, we can send firmware updates over the air. No manual steps needed.
However, you also have the option to update the firmware manually by downloading the necessary files from our website and placing them on an SD card.
Date published: 2025-05-08
Do any of your cameras have the option of turning on/off from the app?
Hello Rondog, thank you for your question. We do have an option to turn off the cellular function of the camera; it will still detect movement and take pictures, but they will not be transmitted. However, the ability to turn it off or on remotely is not available at this time.
Date published: 2025-05-04
how far from the feeder should the camera be mounted?
Hello, thank you for your question. The detection range of the camera is up to 90 feet, so we recommend installing the camera around 30 to 50 feet away from the feeder for optimal photo and detection performance. Make sure the camera is facing the feeder directly and mounted at about chest height for the best results.
Date published: 2025-04-10
I need to monitor the water level of a pond. Is it possible to set up a system to take a photo once a day, for example?
Hello, our cameras operate based on motion detection, meaning they capture images whenever movement triggers them. However, for your specific situation, you can adjust the transmission settings to send pictures anywhere from 1 to 12 times a day. Additionally, by enabling the 'Photo at Each Sync' option, the camera will take a picture at every scheduled sync, even without movement, allowing you to receive an image as frequently as every two hours
Date published: 2025-04-01
I need to use the "Schedule" function, found in the "advanced configuration" settings. Is this available on the Flex M? If not, what cameras have the "schedule" function?
Hello Kylie, Indeed, the FLEX-M camera has a scheduling option. To access and set up this feature, open the SPYPOINT mobile app, go to "Camera Settings," and under "Manage Device," select the "Schedule" option. From there, you can define the times. If you need further assistance, please don't hesitate to reach out to our customer support team at 1-888-779-7646.
Date published: 2025-03-10
