LIT-22

Hello, Thank you for your inquiry regarding our FLEX G-36 Camera, LIT-22 Rechargeable battery, and Solar Panel SPLB-22. The Solar Panel SPLB-22 acts as the primary power source for the G-36 camera. Once fully charged by sunlight, it continuously powers the camera directly. If the power level from the solar panel depletes to a certain threshold, the camera will seamlessly switch to the secondary power source, the rechargeable LIT-22 battery pack. This ensures uninterrupted operation until the solar panel recharges to a safe level again. Regarding the LIT-22 battery pack, it comes with an AC charging cable for recharging, which is provided separately from the camera unit. This allows you to charge the battery pack conveniently outside of the camera. The Solar Panel SPLB-22 does not charge the LIT-22 battery pack directly while connected to the camera. If you have any further questions or need clarification, please feel free to reach out. We're here to help. Have a good day.

Hello, The charging time of the LIT-22 from another battery would depend on several factors, including the capacity and output of the source battery being used for charging; without specific details on the source battery, it's challenging to provide an exact time frame. Given the specifications of the LIT-22 battery (7.4 volts, 5.4 amp-hours), charging it during a field visit of a couple of hours might be feasible with the right equipment, However, it's essential to ensure compatibility and safety protocols when charging. Regarding whether a pair of LIT-22 batteries would be needed for each camera, it ultimately depends on factors such as the expected duration of field visits and the intensity of camera usage, it is important to consider factors affecting camera battery life (signal strength, climate, usage patterns), and additionally follow the recommended guidelines for the initial charging period (24–48 hours) before use with the camera ( AC charging cable included), but having spare batteries on hand can be advantageous for extended use cases or situations where charging may not be immediately possible. If you need further assistance or have additional questions, feel free to reach out. https://www.spypoint.com/en/chat, we're here to help. Thank you for the question. Have a great day.

Hello Maspikey, The duration of the Lit-22 battery can vary from user to user, influenced by individual usage patterns and environmental factors. Variables such as the frequency of transmissions, signal strength, location, and surrounding conditions play significant roles in determining battery life. Factors such as the number of photos taken, transfer frequency, and the camera's settings like multishot mode, operation mode and delay can all impact battery performance. Therefore, it's essential to consider these variables when estimating battery life. Ultimately, understanding how different settings and usage scenarios affect battery life is crucial for maximizing performance. If you have any specifics about how the Lit-22 battery performs with your camera model, feel free to inquire further at https://www.spypoint.com/en/chat, we're here to help. Thank you for your question. Have a great day.

Hello BDM57, Thank you for your inquiry. Our Lit-22 rechargeable lithium battery pack comes with its own charger cable, specifically an AC charging cable included in the package. Have a wonderful day.

Hello J790, Thank you for reaching out and for your interest in our products and services. The LIT-22 rechargeable battery pack is specifically engineered for the FLEX series camera and is not suitable for the LM2 model. For the LM2, you'll need the LIT-10 battery pack, which is designed to work seamlessly with the Link Micro series and the Cell Link. Don't hesitate to check out this accessory through our website at this link: https://www.spypoint.com/en/products/rechargeable-lithium-battery-pack/product-lit-10.html. Have a wonderful day.

Hello SFraley, Thank you for your inquiry. Yes, the LIT-22 was meticulously designed to complement the Flex family. Its seamless compatibility with all FLEX camera models ensures smooth integration and peak performance. Your interest in our products is truly valued. Thank you, and have a great day.

Hello TW198, Excellent choice with the Flex G36! The LIT-22 battery is a perfect match for your camera, specifically designed for the Flex series to ensure optimal performance. Its standout feature is rechargeability, not only saving you money in the long run but also being environmentally friendly. Additionally, it comes with its own charging cord, eliminating the need to search for a separate cable. Thank you for your question and interest in our product. Have a great day.

Hello Channing, everyone starts somewhere? we're here to assist you every step of the way. It's wonderful that you're exploring new features for your cameras. Yes, the Flex G36 cameras are indeed compatible with a solar accessory charger. We provide a solar panel that works seamlessly with all our camera models. The package includes the necessary cable and accessories, allowing easy connection to your unit through the 12V output on the cameras. You can find more information about this solar panel at the following link: https://www.spypoint.com/en/products/lithium-battery-solar-panel/splb-22. If you have any additional questions or require further assistance, please feel free to ask at https://www.spypoint.com/en/chat. We appreciate your interest in our products. Have a good day.

Hello Carey, The solar panel charges the internal battery, which is the primary power source for the camera. If the internal battery depletes to a certain level, the camera will toggle over to the backup battery and use that as a power source until the internal battery has been recharged to a safe charge level. This maximizes the longevity of both the primary and backup battery systems, thank you have a a good day.

Hello Frnk; Using the internal battery and getting a minimum of 4-6 hours of daily direct sunlight in the solar pannel with the Flex S, along with the optional battery backup, is capable of providing you with season-long power autonomy. That said, battery life is greatly dependent on photos taken and other environmental conditions, and many things will change its lifetime, such as signal, attempts to communicate, successful communication, battery quality, transfer frequency, etc. Overall, the setting might affect the battery life too; how the camera is programmed influences the volume of work to be done and therefore the need for energy to carry out its tasks. Thank you, and have a great day.

Hello Nicole, Yes, the Lit-22 battery is specially designed for the Flex family and compatible with all Flex models. Thank you, and have a good day.

Hello Reverend, Thank you for this question. From your app: The two battery indicators indicate, for the first, the charge level of the internal batteries of the solar panel of your camera, and the second indicator refers to the external batteries of the camera, either AA batteries or rechargeable batteries. If this indicates 0%, either recharge if you use the Lit-22 or exchange if you use the AA batteries. However, you must pay attention to the behavior of your unit if it is not influenced by factors that make it use its charge quickly, such as, for example, a weak signal that it seeks continuously or a lot of transfers during the day, and please ensure that the installation corresponds to the needs of this model in terms of availability of sun and orientation of the panel. We would be happy to help you with this if you wish. https://www.spypoint.com/en/chat. Thank you, and good day.

Hello Parks, Thank you for your question. However, we cannot confirm the brand of camera that we don't control at our level. However, with regard to spypoint equipment and specifically this LIT-22 battery, it is dedicated to the FLEX series only and compatible with the configuration and need for flex models. If you encounter the slightest situation with your unit or have any questions, do not hesitate to let us know via: https://www.spypoint.com/en/chat. Thank you, and good day.

Hello Gigi, Indeed, this battery is for use with the SPYPOINT FLEX series only and comes with its own power cord compatible with and adapted to this model of camera. Thank you, and have a good day.

Hello Dm613, We do not recommend using rechargeable AA batteries in our cameras; we recommend using alkaline AA batteries from a reliable, reputable brand such as Energizer or Duracell for the reason that the voltage isn't high enough. Trail cameras are either a 6V or, more commonly, a 12V system and typically run off 8 batteries that need at least 1.5V from each battery, and the rechargeable one can only supply 1.2V. If you can, measure the voltage of your batteries with a voltmeter. Above 1.35V per battery is good. regarding the model Flex-S Initially, the internal battery requires charging with the supplied charging cord. Recharging takes place in the field, but the initial charge should be provided at home, and its solar panel charges the internal battery, which is the primary power source for the camera. If the internal battery depletes to a certain level, the camera will toggle over to the backup battery and use that as a power source until the internal battery has been recharged to a safe charge level. This maximizes the longevity of both the primary and backup battery systems. We hope this helps clear things up. Thank you for your question. Have a good day.

Hello Don613, We do not recommend using rechargeable AA batteries in our cameras; we recommend using alkaline AA batteries from a reliable, reputable brand such as Energizer or Duracell for the reason that the voltage isn't high enough. Trail cameras are either a 6V or, more commonly, a 12V system and typically run off 8 batteries that need at least 1.5V from each battery, and the rechargeable one can only supply 1.2V. If you can, measure the voltage of your batteries with a voltmeter. Above 1.35V per battery is good. regarding the model Flex-S Initially, the internal battery requires charging with the supplied charging cord. Recharging takes place in the field, but the initial charge should be provided at home, and its solar panel charges the internal battery, which is the primary power source for the camera. If the internal battery depletes to a certain level, the camera will toggle over to the backup battery and use that as a power source until the internal battery has been recharged to a safe charge level. This maximizes the longevity of both the primary and backup battery systems. We hope this helps clear things up. Thank you for your question. Have a good day.

Hello Don613, We do not recommend using rechargeable AA batteries in our cameras; we recommend using alkaline AA batteries from a reliable, reputable brand such as Energizer or Duracell for the reason that the voltage isn't high enough. Trail cameras are either a 6V or, more commonly, a 12V system and typically run off 8 batteries that need at least 1.5V from each battery, and the rechargeable one can only supply 1.2V. If you can, measure the voltage of your batteries with a voltmeter. Above 1.35V per battery is good. regarding the model Flex-S Initially, the internal battery requires charging with the supplied charging cord. Recharging takes place in the field, but the initial charge should be provided at home, and its solar panel charges the internal battery, which is the primary power source for the camera. If the internal battery depletes to a certain level, the camera will toggle over to the backup battery and use that as a power source until the internal battery has been recharged to a safe charge level. This maximizes the longevity of both the primary and backup battery systems. We hope this helps clear things up. Thank you for your question. Have a good day.

 Hey, Tim23, Thank you for your question and your interest in our products and services. The solar panel will only charge the 12V battery; it will not charge any other batteries inserted into the camera. To charge this battery, LIT-22, connect it to a USB-C charger using the included USB-C charging cable. While charging, the battery's red light will remain lit, and then the red light will turn green once the battery is fully charged. Make sure to use the LIT-22 lithium battery pack with the SPYPOINT FLEX camera model. Have a wonderful day.

Hey there, First, make sure the LIT-22 is charged for 24-48 hours or until it is fully charged before inserting it into the camera. Depending on the flex camera model you plan to use the battery for, Once you put the battery into the camera, however, the chip within the LIT-22 that communicates with the FLEX’s firmware to recognize the battery level will show 1 bar with a red status if the battery is low and a full green 5 bar when the battery is fully charged. Thank you for this question, Have a good day.

Bonjour Souris, Nous sommes conscients que la batterie LIT-22 affiche un niveau de batterie bas pour certains utilisateurs. Nous nous efforçons de résoudre cette erreur d'affichage. En attendant, tant que la caméra se synchronise aux heures programmées, si le niveau de la batterie n'est pas à zéro, la caméra continue de fonctionner. Continuez à surveiller la fréquence de synchronisation de votre caméra pour vous assurer qu'elle est opérationnelle, et nous nous efforcerons de résoudre le problème d'affichage le plus rapidement possible. De même, avez-vous vérifié depuis l'application que dans le paramétrage de source d'énergie la bonne option est bien sélectionnée ? Cela aussi influence l'affichage des informations du statut de la caméra lors des synchronisations quotidiennes.

Bonjour Gaulois, Merci pour cette question, Le LIT-22 est livré avec le câble de charge approprié. Il est livré avec un câble de charge AC. Vous pouvez aussi utiliser le même bloc de prise USB que vous utilisez pour recharger votre téléphone portable, nous vous suggérons d'utiliser le câble USB pour recharger la batterie pendant 24 à 48 heures avant de l'utiliser avec votre caméra.

Bonjour souris, Oui tout à fait. à la réception du bloc pile, nous vous suggérons de recharger le LIT-22 pendant au moins 24 à 48 heures avant de l'utiliser avec votre appareil photo.

Hey souris, La batterie intégrée à notre caméra série de model Flex, et Flex S est exactement de 7.4 volts, toutes nos caméras sont mesurée en unité volt mais n'hésitez pas pour avoir une conversion exacte à la convertir en unité mAh, j'espère que cela vous aidé, très bonne journée.

Bonjour Souris, Le FLEX-S utilisant la batterie interne, obtenant un minimum de 4 heures de lumière directe du soleil par jour, ainsi qu'une batterie de secours au lithium 8 AA, est capable de vous fournir une autonomie d'alimentation tout au long de la saison. Cependant, la durée de vie de la batterie dépend fortement des photos prises, de la fréquence de transfert, de la force du signal et d'autres conditions environnementales, très bonne journée.

Bonjour Souris, Merci pour cette question, la Flex S est très spécifique dans sa configuration. Le panneau solaire charge la batterie interne, qui est la principale source d'alimentation de la caméra. Si la batterie interne s'épuise à un certain niveau, la caméra basculera sur la batterie de secours et l'utilisera comme source d'alimentation jusqu'à ce que la batterie interne ait été rechargée à un niveau de charge sûr. Cela maximise la longévité des systèmes de batterie primaire et de secours. Le chargement est simple : il suffit de brancher le cordon de charge AC dans la batterie au lithium rechargeable et dans n'importe quelle prise murale compatible pour charger la batterie. Et qui demande aussi l'utilisation du câble Micro-USB inclus et d'un chargeur de prise murale 5 V. Très bonne journée et bonne saison de chasse.

Hello Goalieplayer15, The FLEX-S will only charge the internal battery. The LIT-22 will serve as a backup if the internal battery doesn't have enough charge. Have a good day!

You will be eligible for a buy one get one free when they are back in stock.

Hello JHuggins! Yes, the LIT-22 will work with the FLEX-S. Have a great day!

Hi Nick, we don't have an actual date as to when the LIT-22 will be back in stock via our website, but you can use AA batteries (non--rechargeable) with this model. -KM

Hi Ccstumps, as of right now, we don't have an actual date but we are working hard to have them back in stock as quickly as possible. Thank you for your patience. -KM