IR-10 no Time lapse

Installation instructions

With Camera and SD card:

1. Download the update file from our website:
   http://www.spypoint.com/EN/technical-support/update.php
2. Open the downloaded .zip file by double-clicking on it.
3. Extract the files ASHERJRL.bin and SPYIR10.bin from the .zip file.
4. Copy these files into the SD card.
5. Make sure the camera is turned OFF.
6. Insert the SD card into the camera.
7. Hold down the «OK» button and turn ON the camera.
8. The screen will light up and display "F/W updating…".
9. After approximately 5 seconds, the display will light off. You may turn off the camera and release the «OK» button.
10. The camera firmware will now be up to date.

To confirm the update was successful :

1. Turn OFF the camera.
2. Hold down the «DOWN» button.
3. Turn ON the camera while holding down the «DOWN» button.
4. Check the numbers on the LCD screen. You should see for example: v002. This means the version is 0.2.

For more assistance, you may reach our technical support at 1-888-SPYPOINT or 1-888-779-7646.

*How to know if your IR-10 has Time Lapse mode or not

IR-10 configuration screen without Time Lapse

IR-10 configuration screen with Time Lapse